Case Study: Welding Smoke and Fume Removal
OX3000 air cleaners were installed at a local welding shop to eliminate dangerous smoke and fumes that were creating a thick fog throughout the workspace.
These air filtration systems feature a T-Style airflow pattern that pulls air through dual side inlets and pushes filtered air through a center grill/fan for continuous circulation.
OX3000 units are ideal for welding applications, equipped with dual micro-glass fiber disposable filters that provide greater filter area and reduced static pressure for highly efficient fume capture.
✓ 3000 CFM
✓ 2 H.P. Belt Drive Fan
✓ 8-10 air changes per hour
Challenge: Dangerous Fog from Welding Smoke in a Small Shop
A small local welding shop was struggling with severe ventilation issues. Welding smoke and fumes would accumulate to such dangerous levels that they created a thick fog throughout the workspace.
The shop faced a dual challenge:
- Limited space: The compact facility was crowded with equipment, leaving little room for traditional ventilation solutions
- Health concerns: Prolonged exposure to welding smoke and fumes can cause serious health issues, including lung damage and various types of cancer affecting the lungs, larynx, and urinary tract
Traditional source capture or exhaust systems weren't practical given the space constraints and equipment density.
Solution: OX3000 Air Cleaner Over Main Work Area
One OX3000 ambient air cleaner was strategically installed over the main welding work area to address the smoke and fume accumulation.
The OX3000 air cleaner features a T-Style airflow pattern that pulls air through dual side inlets and pushes filtered air through a center grill/fan, creating continuous circulation throughout the compact workspace.
The OX3000 is deal for small to medium welding shops, equipped with dual micro-glass fiber disposable filters that provide greater filter area and lower static pressure for efficient fume capture.
Key Features:
- 3000 CFM airflow capacity
- Single-unit solution for small to medium welding shops
- Dual micro-glass fiber filters providing increased filter area and reduced static pressure
- Compact installation perfect for space-constrained facilities
Results: Dramatic Reduction in Harmful Welding Fumes
The OX3000 delivers significant improvements:
- Harmful welding smoke and fumes greatly reduced from the air
- Improved air circulation throughout the work area
- Elimination of thick fog that previously filled the workspace
- Healthier, safer work environment for welding operations
The solution proved that even compact welding shops with limited space can achieve effective fume control with the right equipment placement.
Why Choose Fume Xtractors?
Space-Efficient Solutions for Compact Shops
Ceiling-mounted design provides powerful fume extraction without consuming valuable floor space in crowded facilities. Ideal for small welding shops where every square foot matters.
Protects Worker Health
Effectively removes dangerous welding fumes and smoke that can cause lung damage and cancer, creating a safer work environment for daily welding operations.
Simple Installation, Immediate Results
Single-unit installations can dramatically improve air quality in small to medium shops. No complex ductwork or extensive modifications required.
Continuous Air Circulation
T-Style airflow pattern creates circulation throughout the workspace, preventing fume accumulation and eliminating the thick fog conditions that impair visibility and health.
Complete Product Line for Any Shop Size
From compact OX3000 units for small shops to heavy-duty OX7000 air cleaners for large facilities, our complete line of ambient air cleaners addresses welding fume challenges in facilities of any size.